Maintenance skills of led flood light

The LED flood light is mainly composed of LED light source, LED power supply, shell, waterproof gasket and water-proof glue. The LED light source, driver quality is excellent, waterproof is made well, and the shell material is thick enough, there is basically no problem with the flood light. So, what if the LED flood light is broken, does not light up, flashes, sometimes bright, or slightly bright, what should I do? Today I will tell you the maintenance and technical methods.


LED flood light is a very common product. No matter what kind of product it is, there will always be some small problems after a long time of use. If it is a small problem, you can usually solve it by yourself, but if it is a big problem You need to contact the manufacturer for repairs. The user will encounter some corresponding minor faults when using the LED flood light. There are corresponding repair methods for these minor faults. Today we are going to share with you the repair skills provided by LED flood light manufacturers.





In the beginning, it was necessary to perform operations according to the environment and lighting needs of the site, and then perform some subsequent operations when determining the location. After that, you need to unscrew the fixing screw of the back cover of the ballast, open the back cover, and then loosen the compression nut of the cable inlet of the ballast, and lead one end of the cable through the compression nut to the input terminal block of the control circuit board. Connect the L, N, and ground wires of the cable to the corresponding terminal block, then tighten the cable compression nut and fasten the back cover of the ballast with screws. When replacing the bulb, you need to loosen the three wing nuts in the middle of the lamp cap first, then pull up the tail of the lamp cap to open the lamp cap, unscrew the broken bulb and replace it with a new one, and then restore the lamp cap in the reverse order. The entire operation steps are very simple and easy to operate.


It is a very normal phenomenon to have a problem when using LED flood light. If it is a small problem, it can be operated well according to the corresponding maintenance method, but if the problem is very serious, then there is no way to go. For maintenance, only a new LED floodlight can be used for use. The price of LED flood light sold in the market is relatively moderate, and this price is generally acceptable.